JSP Force 8 Press To Check Replacement Twin Filters P3 99.95%
- Manufacturers
-
ManufacturerJSP
-
- Extra fields
-
MPNBMN990-001-700
-
GTIN5038428154161
-
Pack of 2 Replacement PressToCheck P3 R Filters
For use with JSP Force 8 Half Mask and Typhoon Force 10 Full-Face Mask. With the new patent pending Force 8 PressToCheck filters you can instantly check that you have the correct face seal every time. P3 offer improved filtration performance than P2 filters.
- P3 R Particle Filter Cartridges
- 99.95% Particle Filtration Efficiency
- to EN143:2000/A1:2006
FIT IT!
Don the Mask - Put the straps and harness over your head and pull the straps to a suitably tight and comfortable fit.
PRESS IT!
PressToCheck™ - Press the front and backs of both filter covers together to stop air from entering through the filters.
CHECK IT!
Inhale - No air should come through the mask. Adjust the mask and repeat until it doesn't. Release when seal is made.
| Application | Hazard | P3 Filter | ABEK1P3 Filter |
|---|---|---|---|
| Construction Dusts | Silica, conocrete and stone cutting, plaster | P3 | ABEK1P3 |
| Fumes | Welding, ferrous & lead | P3 | ABEK1P3 |
| Woods | Woods hard, woods soft | P3 | ABEK1P3 |
| Woods | MDF machine tooling | - | ABEK1P3 |
| Fibres | Fibres & Fiberglass | P3 | ABEK1P3 |
| Painting tasks | Water based paints, manual preparation, powered preparation, | P3 | ABEK1P3 |
| Painting tasks | Brush solvent based, spray solvent based, chemical paint stripping, heat paint stripping, white spirits | - | ABEK1P3 |
| Maintenance | Glyphosate (weed killer) | P3 | ABEK1P3 |
| Maintenance | Chlorine, brick acid | - | ABEK1P3 |
| Odours | Earth moving (contaminated), resins | - | ABEK1P3 |
What filters to use: Press to Check filter selection guide (external link)
this table is for guidance only, a proper risk assessment should be carried out before selecting an appropriate filter cartridge
