Disposable Mask (N99) FFP3 Valved Respirator
- Extra fields
FFP3 Mask Disposable Respirator Valved
Highest protection from airborne infection
Deluxe disposable FFP3 respirator mask with exhalation valve offers effective protection against bacteria and virii including Avian Flu (H5N1), Swine Flu (H1N1) and SARS (including COVID-19). The mask is a fold flat design that is individually packed to enable compact and easy storage. The exhalation valve allows you to wear the mask for longer periods (8 hours max) without the discomfort of heat and moisture build up. FFP3 is the closest European equivalent of N99.
These JSP masks are now latex free.
Disposable Respirator Valved Mask FFP3 Features
- FFP3 rated respirator mask to EN149:2001 (closest European equivalent of NIOSH N99)
- highest protection from airborne infection (99.99% efficiency)
- built in exhalation valve improves efficiency and comfort
- deluxe fold flat design with fully adjustable bands
- recommended by the WHO for health care workers
- single use
- five year shelf life
Current infection control procedures stipulate the use of personal protective equipment (PPE) for healthcare workers exposed to airborne infection. A correctly fitting FFP3 mask is the PPE component recommended for exposure to viral airborne infections. In addition, FFP3 masks offer protection from fine toxic dusts, bacteria, fibres, aqueous mists, and oil based mists. CE Marked. EN149:2001 compliant.
Use: The FFP 3 disposable face mask is for single use only. It should not be used for more than 8 hours continuously and should be safely discarded after use. Use only when a concentration of contaminants is not immediately dangerous to life or health, and only in accordance with the applicable health and safety standards. As required by the European Health and Safety requirements the user is advised that when the disposable face mask is in contact with the wearer's skin, it may cause allergic reaction to susceptible individuals.
Correct fitting of FFP3 disposable face masks: Hold the disposable FFP3 face mask mask firmly and place the bottom headband over the head to the nape of the neck. Place the mask over the nose putting the top headband over the crown of the head. Ensure the nose clip is securely moulded around the nose, resting the ends against the cheek to obtain a good seal. To check the fit, place both hands completely over the respirator and inhale vigorously. If air leaks at the edge, readjust the mask, manipulating the nose bridge and headband to effect an acceptable seal. If a proper seal cannot be obtained DO NOT enter the contaminated area. JSP fit test guide
Correctly used, PPE (Personal Protective Equipment) reduces the possibility of infection. Hand hygiene measures should be used in addition to the use of PPE. Protective equipment should be worn and removed in the correct order. Please note that during and after use the external surfaces of protective equipment are considered potentially contaminated. Never touch your eyes, nose, mouth or face, with potentially contaminated, unclean or gloved hands: you risk infecting yourself.
Doff/Don procedure: How to fit and remove a vertical disposable fold flat face mask FFP3 - JSP Video