Disposable Mask FFP2 

F600 series JSP Vertical fold flat respirator with foam padded adjustable nose clip, extended chin coverage. Packaged individually in a clear resealable bag. A mouldable nose bridge and foam pad on the inside for comfort and a firmer fit. Fold flat design is compact and easy to carry in a pocket. Toggle adjuster on each strap to achieve an effective facial fit. Conforms to EN 149
FFP2: 94% minimum filtration efficiency.
Disposable fold flat FFP2 respirator mask. FFP2 masks offer protection from fine toxic dusts, fibres, aqueous mists, and oil based mists. Non-valve design ensures exhaled air is filtered to help protect clean spaces and medical environments from further contamination.

We've tried these new masks, they are much more comfortable to wear than the old version of the JSP FFP2 mask. The mask fits well below the chin, covering a larger area of the face so it doesn't feel constricted.

Disposable Mask FFP Features

• FFP2 rated respirator mask to EN149:2001 
• individually packed
• exp 12/2025
• quick toggle adjuster on head straps

Use:  The FFP 2 disposable face mask is for single use only. It should not be used for more than 8 hours continuously and should be safely discarded after use. Use only when a concentration of contaminants is not immediately dangerous to life or health, and only in accordance with the applicable health and safety standards. As required by the European Health and Safety requirements the user is advised that when the disposable face mask is in contact with the wearer's skin, it may cause allergic reaction to susceptible individuals.

Correct fitting of FFP2 disposable face masks:  Hold the disposable FFP2 face mask mask firmly and place the bottom headband over the head to the nape of the neck. Place the mask over the nose putting the top headband over the crown of the head. Ensure the nose clip is securely moulded around the nose, resting the ends against the cheek to obtain a good seal. To check the fit, place both hands completely over the respirator and inhale vigorously. If air leaks at the edge, readjust the mask, manipulating the nose bridge and headband to effect an acceptable seal. If a proper seal cannot be obtained DO NOT enter the contaminated area.

JSP comparison of FFP2 N95 KN95