JSP Force 8 Press To Check Replacement Twin Filters ABEK1P3
- Extra fields
- £29.00 (ex VAT)
- £34.80 (inc VAT)
Pack of 2 Replacement PressToCheck ABEK1 P3 Filters
For use in conjunction with JSP Force 8 Half Mask and Force 10 full-face Mask. With the new patent pending Force 8 PressToCheck filters you can instantly check that you have the correct face seal every time.
- ABEK1 P3 Particle Filter Cartridges
- to EN143:2000/A1:2006
Don the Mask - Put the straps and harness over your head and pull the straps to a suitably tight and comfortable fit.
PressToCheck™ - Press the front and backs of both filter covers together to stop air from entering through the filters.
Inhale - No air should come through the mask. Adjust the mask and repeat until it doesn't. Release when seal is made.
|Construction Dusts||Silica, concrete and stone cutting, plaster||P3||ABEK1P3|
|Fumes||Welding, ferrous & lead||P3||ABEK1P3|
|Woods||Woods hard, woods soft||P3||ABEK1P3|
|Woods||MDF machine tooling||-||ABEK1P3|
|Fibres||Fibres & Fiberglass||P3||ABEK1P3|
|Painting tasks||Water based paints, manual preparation, powered preparation,||P3||ABEK1P3|
|Painting tasks||Brush solvent based, spray solvent based, chemical paint stripping, heat paint stripping, white spirits||-||ABEK1P3|
|Maintenance||Glyphosate (weed killer)||P3||ABEK1P3|
|Maintenance||Chlorine, brick acid||-||ABEK1P3|
|Odours||Earth moving (contaminated), resins||-||ABEK1P3|
Selection guide: Press to Check filters (external link)
this table is for guidance only, a proper risk assessment should be carried out before selecting an appropriate filter cartridge