JSP Force 8 Press To Check Replacement Twin Filters P3 99.95%
- Extra fields
- £11.42 (ex VAT)
- £13.70 (inc VAT)
Pack of 2 Replacement PressToCheck P3 R Filters
For use with JSP Force 8 Half Mask and Typhoon Force 10 Full-Face Mask. With the new patent pending Force 8 PressToCheck filters you can instantly check that you have the correct face seal every time. P3 offer improved filtration performance than P2 filters.
- P3 R Particle Filter Cartridges
- 99.95% Particle Filtration Efficiency
- to EN143:2000/A1:2006
Don the Mask - Put the straps and harness over your head and pull the straps to a suitably tight and comfortable fit.
PressToCheck™ - Press the front and backs of both filter covers together to stop air from entering through the filters.
Inhale - No air should come through the mask. Adjust the mask and repeat until it doesn't. Release when seal is made.
|Construction Dusts||Silica, conocrete and stone cutting, plaster||P3||ABEK1P3|
|Fumes||Welding, ferrous & lead||P3||ABEK1P3|
|Woods||Woods hard, woods soft||P3||ABEK1P3|
|Woods||MDF machine tooling||-||ABEK1P3|
|Fibres||Fibres & Fiberglass||P3||ABEK1P3|
|Painting tasks||Water based paints, manual preparation, powered preparation,||P3||ABEK1P3|
|Painting tasks||Brush solvent based, spray solvent based, chemical paint stripping, heat paint stripping, white spirits||-||ABEK1P3|
|Maintenance||Glyphosate (weed killer)||P3||ABEK1P3|
|Maintenance||Chlorine, brick acid||-||ABEK1P3|
|Odours||Earth moving (contaminated), resins||-||ABEK1P3|
What filters to use: Press to Check filter selection guide (external link)
this table is for guidance only, a proper risk assessment should be carried out before selecting an appropriate filter cartridge